{
  "id": "MFG-CV01-P02",
  "equipment_id": "MFG-CV01",
  "model_version": "1.0.0-concept",
  "revision": "D1",
  "title": "Block seating and guide-motion rehearsal",
  "status": "CONCEPT_TRAINING_DRAFT_NOT_OPERATING_SOP",
  "scope": "For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.",
  "source_basis": "Original authored concept; no approved customer/OEM SOP supplied.",
  "components": [
    "RAIL-L",
    "RAIL-R",
    "GB-B2",
    "HW-01",
    "PIN-01",
    "PIN-02",
    "GB-B1",
    "SAMPLE-01"
  ],
  "steps": [
    {
      "number": 1,
      "action": "Confirm equipment and task identity.",
      "evidence": "MFG-CV01 \u00b7 Conveyor changeover rig. Record draft D1 and model 1.0.0-concept.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 2,
      "action": "Confirm the inert training boundary.",
      "evidence": "For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 3,
      "action": "Inspect PIN-01 and PIN-02 with the component picker.",
      "evidence": "Both locating features must be identified before discussing seating.",
      "components": [
        "PIN-01",
        "PIN-02"
      ],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 4,
      "action": "Select GB-B2 and use Block lift.",
      "evidence": "Separate the block in the model; this is a visual training motion.",
      "components": [
        "GB-B2"
      ],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 5,
      "action": "Orbit below the lifted block.",
      "evidence": "Inspect the open underside and illustrative receiver geometry.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 6,
      "action": "Compare each receiver with the two locating pins.",
      "evidence": "The geometry shows a relationship; source-defined clearance and fit remain unverified.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 7,
      "action": "Return Block lift to zero.",
      "evidence": "Record the assembled illustration without claiming a measured seated condition.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 8,
      "action": "Use Guide travel and identify RAIL-L / RAIL-R.",
      "evidence": "The channels translate the concept rails symmetrically; the belt stays stopped.",
      "components": [
        "RAIL-L",
        "RAIL-R"
      ],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 9,
      "action": "Inspect HW-01 and both carriages.",
      "evidence": "The visible handwheel is a named reference; native pivot/coupling acceptance belongs to Jan.",
      "components": [
        "HW-01"
      ],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 10,
      "action": "Stop at the first-piece evidence gate.",
      "evidence": "Require the approved setting and physical check criteria before any real acceptance.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 11,
      "action": "Prepare the evidence record.",
      "evidence": "Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    },
    {
      "number": 12,
      "action": "Request qualified review before reuse.",
      "evidence": "Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.",
      "components": [],
      "hold_if": "Identity, source applicability or required evidence is missing or inconsistent."
    }
  ]
}