Sample and inspection-source briefing

MFG-QC01-P01 · Concept training procedure draft · D1 · 29 October 2026

For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.

Equipment MFG-QC01 · model 1.0.0-concept · source: original concept, approved SOP absent.

1. Confirm equipment and task identity.

   MFG-QC01 · First-piece inspection bench. Record draft D1 and model 1.0.0-concept.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

2. Confirm the inert training boundary.

   For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

3. Identify SAMPLE-Q1.

   Retain a sample identifier rather than judging a generic image.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

4. Locate DATUM-01 and FIXTURE-01.

   These are illustrative reference features.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

5. Locate GAUGE-L and GAUGE-R.

   No jaw spacing is a calibrated measurement.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

6. Inspect the readout prop.

   It intentionally carries no claimed production measurement.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

7. Request the current drawing and inspection plan.

   Acceptance cannot be inferred from the model.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

8. Ask for calibration and method records.

   A real check requires suitable, current equipment and a qualified method.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

9. Identify the disposition authority.

   The learner cannot self-authorise production acceptance.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

10. Hold the sample disposition.

    Source-defined criteria and actual measured evidence are missing.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

11. Prepare the evidence record.

    Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

12. Request qualified review before reuse.

    Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

Qualified source, geometry and procedure review required before operational reuse.