First-piece observation rehearsal

Read the draft before the model.

12 authored steps

A sequence with visible evidence gates.

1. Confirm equipment and task identity.

   MFG-QC01 · First-piece inspection bench. Record draft D1 and model 1.0.0-concept.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

2. Confirm the inert training boundary.

   For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

3. Select SAMPLE-Q1 and lift it in the model.

   The lift demonstrates access only.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

4. Inspect the fixture relationship.

   A rendered seating position is not proof of repeatability.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

5. Return the sample to the reference plate.

   This resets the illustration without accepting the sample.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

6. Use Guide travel to inspect comparator-jaw motion.

   No numerical or engineering interpretation is supported.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

7. Describe visible features separately from measured features.

   Record what an image can and cannot establish.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

8. Locate TRAY-HOLD.

   Missing evidence maps to HOLD in the training decision.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

9. Locate TRAY-ACCEPT without moving the sample there.

   Acceptance requires the approved criterion and a real result.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

10. Prepare the physical evidence request.

    Include method, units, sample identity, source version and reviewer.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

11. Prepare the evidence record.

    Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

12. Request qualified review before reuse.

    Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

Keep the equipment and source together.

Referenced components: DATUM-01, GAUGE-L, GAUGE-R, FIXTURE-01, SAMPLE-Q1, TRAY-ACCEPT, TRAY-HOLD.

Required operating inputs: Inspection plan; calibrated equipment records; drawing revision; sample traceability; acceptance criteria and disposition authority.